Petroleum Coke

Petcoke consists of carbon 85~99%, and hydrogen in concentrations between 3.0-4.0%. Raw (or green) coke contains between 0.1-0.5% nitrogen and 0.2-6.0% sulfur which become emissions when coke is calcined.

Aviation Kerosene Colonial Grade 54 (JP-54)

Aviation Kerosene Colonial Grade 54 (JP-54) serves as a jet fuel for gas-turbine engines, possessing distinct characteristics such as a density of approximately 0.8 g/cm³, a flash point of no less than 38°C, and a freezing point of -40°C or lower.

This fuel is a premium, kerosene-derived product, ranging in color from clear to straw-colored, intended for use in both commercial and military sectors, and is recognized for its dependable performance and efficiency.

EN590 (10PPM)

EN590 (10PPM) 10ppm, an Ultra-Low Sulfur Diesel (ULSD), is defined by its maximum sulfur content of 10 parts per million, which significantly reduces emissions. Key characteristics include a high cetane number (minimum 51) for excellent ignition quality and engine performance, a specified density range (820-845 kg/m³), a flash point of at least 55°C, a viscosity of 2.0–4.5 mm²/s at 40°C, and a maximum water content of 200 mg/kg.

Jet A1 Fuel

Jet A-1 fuel is a globally used, kerosene-grade fuel for turbine engines, characterized by a flash point of at least 38°C (100°F), a maximum freezing point of -47°C (-52.6°F) for use in cold conditions, a density between 775.0-840.0 kg/m³, and a maximum smoke point for clean combustion. It is a carefully refined, light petroleum product that must meet strict international specifications like the UK's DEF STAN 91-91 and ASTM D1655 to ensure safety and performance.

Urea 46% Prilled & Granular

Urea 46 Prilled Granular/Urea Fertilizer 46-0-0/Urea N46%. High-quality nitrogen fertilizer for agricultural use.

D2 Diesel Gas Oil

Gas Oil Class D Specifications. High-quality diesel fuel meeting international standards for various industrial and transportation applications.

Liquefied Petroleum Gas (LPG)

Also called LP gas, any of several liquid mixtures of the volatile hydrocarbons propene, propane, butene, and butane. A versatile fuel source for heating, cooking, and industrial applications.

ESPO Crude

Also known as Urals oil, is a medium gravity sour crude with density (specific gravity) @ 20°C of 0.870 g/sm³ (ASTM D5002). A widely traded crude oil blend with consistent quality and reliable supply.

D6 Virgin Fuel Oil

Virgin Fuel Oil (D6) is a high-viscosity, residual fuel with a high energy density, requiring pre-heating before use. Its key characteristics include a density of approximately 0.95–0.99 g/cm³, a high flash point above 60°C, and a high calorific value suitable for power generation, industrial heating, and marine propulsion. D6 is also known as Bunker C Fuel Oil or Residual Fuel Oil (RFO) and consists of long-chain hydrocarbons.

Mazut M100

Mazut (Russian: Мазут, romanized: Mazut) Mazut M100 is a heavy fuel oil characterized by its high viscosity, with typical kinematic viscosity around 118 mm²/s at 50°C, and a high flash point, often a minimum of 110°C. Used primarily for industrial heating and power generation.